Antiperovskites with Exceptional Functionalities

ABX₃ perovskites, as the largest family of crystalline materials, have attracted tremendous research interest worldwide due to their versatile multifunctionalities and the intriguing scientific principles underlying them. Their counterparts, antiperovskites (X₃BA), are actually electronically inverted perovskite derivatives, but they are not an ignorable family of functional materials. In fact, inheriting the flexible structural features of perovskites while being rich in cations at X sites, antiperovskites exhibit a diverse array of unconventional physical and chemical properties. However, rather less attention has been paid to these “inverse” analogs, and therefore, a comprehensive review is urgently needed to arouse general concern. Recent advances in novel antiperovskite materials and their exceptional functionalities are summarized, including superionic conductivity, superconductivity, giant magnetoresistance, negative thermal expansion, luminescence, and electrochemical energy conversion. In particular, considering the feasibility of the perovskite structure, a universal strategy for enhancing the performance of or generating new phenomena in antiperovskites is discussed from the perspective of solid-state chemistry. With more research enthusiasm, antiperovskites are highly anticipated to become a rising star family of functional materials.     

某800 t/d级浮法薄玻璃生产线项目建设的得失分析

总结了某800 t/d浮法薄玻璃生产线项目建设的教训与经验,通过项目过程中发生的真实案例,对项目建设中存在的不足进行了深入剖析,并就项目的方案制定、材料与供方选择、建设工期与质量控制等工作提出了改进建议。     

Properties of multiple oxide-bonded porous SiC ceramics prepared by an infiltration technique

Multiple oxide-bonded porous SiC ceramics were fabricated by infiltrating a porous powder compact of SiC and alumina with cordierite sol followed by sintering at 1300-1400°C in air for 3 hours. The microstructures, phase components, mechanical properties, and air permeation behavior of the developed porous ceramics were examined and compared with materials obtained by the traditional powder processing route. The porosity, average pore diameter, and flexural strength of the ceramics varied from 33 to 37 vol%, ~12-14 μm and ~23-39.6 MPa, respectively, with variation in sintering temperature. The X-ray diffraction results reveal that both the amount of cordierite and mullite as the binder increased with increase in sintering temperature. In addition, it was found that the addition of alumina in powder form effectively enhanced the strength due to formation of mullite in the bond phase in contrast to the samples prepared without alumina additive. To determine the suitability of the material in particulate filtration application, particle collection efficiency of the filter material was evaluated theoretically using single collector efficiency model.     

硅渣和玻璃粉直接烧结制备多孔材料的气孔结构与力学性能

以硅渣和玻璃粉为原料,采用粉体直接烧结法制备多孔材料,研究了烧结温度(700~900℃)、烧结时间(15~120min)和升温速率(10~100℃·min^-1)对多孔材料表观密度、气孔率、物相组成、抗压强度的影响。结果表明:气孔结构均匀性随烧结温度的升高而降低;表观密度随烧结温度的升高先减小后增大,随保温时间的延长而增大,随升温速率的增大而减小,气孔率的变化趋势与表观密度的相反;多孔材料的主要物相为玻璃相和硅、SiC、SiO2、Ca2Al2SiO7等结晶相,且结晶度随烧结温度的升高而降低;抗压强度随烧结温度的升高呈先增大后减小的趋势;当烧结温度为750℃,升温速率为30℃·min^-1,烧结时间为30 min时,多孔材料的主晶相为硅和Ca2Al2SiO7,抗压强度最大(1.60MPa),表观密度为0.43g·cm^-3,气孔率为80%。     

凉感纤维织物导热系数影响因素的探讨

采用普通涤纶、含1%云母颗粒的涤纶(1%云母/涤纶)以及含5%云母颗粒的涤纶(5%云母/涤纶)三种材质,上机纬密采用200根/10 cm、300根/10 cm、400根/10 cm,组织采用平纹、斜纹、缎纹试织试样。通过Hot Disk热常数分析仪,采用正交试验及极差、方差分析,研究了纤维材质、上机纬密、组织对凉感纤维织物导热系数的影响。结果表明:在试验设置变量范围内,纤维材质对导热系数的影响显著,上机纬密、组织对导热系数的影响高度显著,影响因素从大到小顺序为上机纬密>组织>纤维材质。     

锰基富锂正极材料Li_(1.2)Ni_(0.2)Mn_(0.59)Co_(0.01)O_2的首次充放电曲线分析

采用溶胶-凝胶法制备了锰基富锂正极材料Li1.2Ni0.2Mn0.59Co0.01O2。在类似的实验条件下制备了3组样品。分别用3组共计13个样品作为正极、金属锂作为负极制备了扣式电池以研究其首次充放电曲线和Coulomb效率。发现首次充电时平台容量(CP)占总充电容量(CT)的比例为首次Coulomb效率的曲线函数。而首次放电时,在3.5 V两侧均有1个放电平台,其微分容量曲线(d Q/d U)中2个峰的峰值比(PB/PC)为首次Coulomb效率的线性函数。通过分析,提出一个模型来解释锰基富锂材料的首次充放电行为。     

Two-Dimensional Problem of a Crack in Thermoelectric Materials

The two-dimensional problem of a crack in thermoelectric materials is studied in this research. The general solution is derived based on the complex variable method. For the case of a crack subjected to remote electric current and heat flow, the solutions are obtained in closed-form. The results show that the fields of heat flow, electric current, and stress exhibit traditional square-root singularity at the crack tip. The remote electric current produces both type I and II stress intensity factor. Furthermore, the stress intensity factor has a linear relationship with the heat flux, but a non-linear relationship with the electric current.     

基于期权合约的战备物资储备激励机制研究

针对通用战备物资依托企业合同储备问题,从合作博弈的角度出发,引入期权合约理论,构建期权合约下合同储备激励机制模型。分析影响各方博弈主体策略选择的因素,对不同策略下参与主体双方的利润期望进行比较分析,确立期权合约理论下合理的期权价格范围,寻求军地双赢策略。实例分析表明,提出的方法具有可行性和有效性。     

Exploration of amorphous hollow FeOOH@C nanosphere on energy storage for sodium ion batteries

Sodium ion batteries (SIBs) have enjoyed a high profile in recent years and gradually been commercialized to supplement the lithium-ion batteries system. However, the large volume expansion of anode materials within discharging and low electrical conductivity hinder the application of SIBs. In this work, a FeOOH@C composite was synthesized with the use of hydrothermal method and pyrolyzing of polydopamine. The amorphous FeOOH exhibits a hollow spherical structure to offer free space for buffering the volumetric variation. Furthermore, the outer carbon served as a protective shell could maintain the sphere integrity and enhance the electrical conductivity. Hence, benefiting from the achieved synergy of the hollow architecture, amorphous structure and carbon shell, the composite presented a long cycle life (316 mA h g^?1 after 500 cycles at a current density of 100 mA g^?1 and 234.5 mA h g^?1 after 400 cycles at 2 A g^?1) and high-rate performance (180 mA h g^?1 at 5 A g^?1), revealing a potential to be a promising candidate for electrode material of SIBs.     

Effect of temperature on raw whole milk density and its potential impact on milk payment in the dairy industry

The objective of this study was to determine the effect of temperature on whole milk density measured at four different temperatures: 5, 10, 15, and 20 °C. A total of ninety-three individual milk samples were collected from morning milking of thirty-two Holstein Friesian dairy cows, of national average genetic merit, once every two weeks over a period of 4 weeks and were assessed by Fourier transform infrared spectroscopy for milk composition analysis. Density of the milk was evaluated using two different analytical methods: a portable density meter DMA35 and a standard desktop model DMA4500M (Anton Paar GmbH, UK). Milk density was analysed with a linear mixed model with the fixed effects of sampling period, temperature and analysis method; triple interaction of sampling period x analysis method x temperature; and the random effect of cow to account for repeated measures. The effect of temperature on milk density (ρ) was also evaluated including temperature (t) as covariate with linear and quadratic effects within each analytic method. The regression equation describing the curvature and density–temperature relationship for the DMA35 instrument was ρ = 1.0338−0.00017T−0.0000122T² (R² = 0.64), while it was ρ = 1.0334 + 0.000057T−0.00001T² (R² = 0.61) for DMA4500 instrument. The mean density determined with DMA4500 at 5 °C was 1.0334 g cm⁻³, with corresponding figures of 1.0330, 1.0320 and 1.0305 g cm⁻³ at 10, 15 and 20 °C, respectively. The milk density values obtained in this study at specific temperatures will help to address any bias in weight–volume calculations and thus may also improve the financial and operational control for the dairy processors in Ireland and internationally.